Although the printing industry of the Shenzhen printing plant is very developed, even for a well-known printing company, the color difference will still appear more or less when printing corporate brochures. It is just how to control and keep it at an acceptable level. Within range. Some corporate brochure printers have been unable to perform color correction because many of the colors on the screen cannot be printed at all, or have serious color shifts. If they cannot be corrected at the design stage, it is too late to wait until the finished product is printed. Up. The following is a detailed introduction to how the Shenzhen printing plant controls color difference.
In order to avoid such problems, color correction before printing of corporate brochures is very important. First of all, it is necessary to carry out equipment calibration and system calibration. These equipments include scanning equipment, display equipment, output equipment and proofing equipment. These equipment must undergo strict professional calibration. In addition, there must be a relatively complete set of colors between these equipment. Management solutions, these are the basis for our color correction.
Secondly, the level of correction must be carried out before the color correction. Because according to the color rendering mechanism, the color is presented on the basis of neutral gray level, so the level should be corrected before the color correction, otherwise, after the color correction is completed, the color will change when the level is corrected.